Cat Command

Command

<p>Combining the Fleet, Terrain, Detect and Health capabilities of Cat® MineStar™ System, Command enables you to implement remote control, semi-autonomous or fully autonomous mining equipment systems &#8211; offering unprecedented improvements in operator safety, equipment availability and site productivity.</p>


Cat Command for Dozing Brochure (N Am, S Am, Japan)

Cat Command for Dozing Brochure (Europe, Aus-NZ)

<ul><li>Command is a remote control ready dozing option that contributes to job site safety by allowing operators to run a bulldozer remotely in hazardous mining and earthmoving applications.</li><li>Helps protect operators in jobs like overburden/reclamation work, highwall or stockpile management, ripping overburden or leach pads, slurry pond dozing and operation around hazardous materials or unstable surfaces.</li><li>Lower potential injuries from slips, trips and falls when climbing on and off machines.</li><li>Optional Commandfor Dozing is deeply integrated with Cat machine systems to enable smooth, precise control for maximum efficiency and productivity.</li></ul>

Work at a Safe Distance

<ul><li>Operators can quickly and easily switch between Cat Command installed machines, and change jobsite locations, with no downtime.</li><li>Reduce operator fatigue by eliminating the in-cab effects of vibration, noise, and rough terrain.</li><li>Control the machine with the same response time as sitting in the cab.</li><li>Select and activate machine features from the Command Station as though the operator was in the machine.</li><li>Allow operators who have had medical concerns to return to work and operate machines earlier.</li></ul>

Enhance Productivity

<ul><li>Available for select Cat dozers, excavators, and wheel loaders.</li><li>Allows operator to be positioned for optimal visibility with a 400 meter (437 yd) range.</li><li>Switch easily between manual or remote mode for versatile operation in all applications.</li><li>Operator inputs are sent directly to the machine electronics via a dedicated radio transmitter/receiver, resulting in real-time implement control.</li><li>Does not require any on-site communications infrastructure.</li><li>Uses 2.4 GHz frequency communications protocol.</li><li>The machine will shut down if the controller is tipped more than 45 degrees, indicating that the operator has fallen.</li></ul><br /><em>NOTE: Command Console is unavailable in Europe, Australia, or New Zealand.</em>

CAT COMMAND CONSOLE

<ul><li>Available for select Cat dozers, excavators and wheel loaders.</li><li>Remote operator station is set up similarly to a dozer cab, providing an ergonomic, seated position and familiar control layout.</li><li>Can be located in a command center onsite or many miles away.</li><li>Reduces operator fatigue with a comfortable indoor working environment.</li><li>Operator inputs are sent directly to the machine electronics via a dedicated radio transmitter/receiver, resulting in real-time implement control.</li><li>Controls deliver the same response time as in the cab, maintaining precise control for all excavator applications.</li><li>High-quality video delivers a clear view of the work area.</li><li>Operator sees visuals from the left and right cutting edges, the top/center of the blade and a rearview that includes the ripper.</li><li>Operators can easily switch between machines, or change jobsites with no downtime.</li><li>Enables trainers to stand beside an operator, without noise or movement.</li></ul>

CAT COMMAND STATION

<ul><li>Cat Command is designed exclusively for – and deeply integrated into – select Cat machines, resulting in system reliability and durability.</li><li>Select Cat Command models include easy-to-install Command kits.</li><li>Cat Command can be retro-installed on certain existing Cat machines.</li></ul><em>* Talk to your Cat dealer for more information about Cat Command.</em>

Get started with Cat Command

Cat Command remote control technology provides full dozer maneuverability from a safe distance when working in hazardous environments. Command offers the choice of line-of-sight consoles or long-distance operator stations (non-line-of-sight). By removing the operator from the cab, it eliminates machine vibration, reducing fatigue.

Take Command of Job Site Safety and Productivity

Remove operators from hazardous jobsite conditions by controlling machines from a safe distance, eliminating safety risks, and reducing injuries from climbing on and off machines.

SAFETY

Restart production immediately following disruptive processes - such as blasting, decrease downtime with quick shift changes, and reduce fatigue by eliminating the effects of vibration, noise, and rough terrain.

PRODUCTIVITY

Retain smooth and precise machine control as if operating from the cab, maintain access to advanced machine features, built in safety features shuts down the machine due to power or communications loss.

CONTROL

Cat® Command | Remote Control for Dozing in Construction

Pushing Boundaries with Cat® Command for Dozing

Cat Command for Dozing – Preston Contractors

Cat Command for Dozing - Saiia

Cat® Command For Dozing - Small Dozers Overview

Cat® Command Operator Assist Features for Small Dozers

Segs4Vets Test out Cat® Command for Dozing

Cat® Command Technology For The Demolition Industry

A Stop (All Stop) Technology for Cat Command Remotely Controlled Machines

Virtual Product Tour

Cat COMMAND for Dozing

Safety

Scalability

Productivity

Efficiency

Integration

Portable Remote Console

Remote Operator Station

Semi-Autonomous Operation

Sustainability

Cat® MineStar™ Command for dozing improves safety and efficiency by taking operators off their machines and letting them work from either nearby or remote locations. Whether you choose the over-the-shoulder remote control console or the remote operator station, your operators can have full control of the dozer without being exposed to dust, noise, vibration or other hazards. With semi-autonomous dozing, a single operator can manage up to four machines from a remote location — boosting productivity and safety Deep integration with Cat machine systems enables smooth, precise control for maximum efficiency and productivity.

BOOST DOZING  EFFICIENCY &  SAFETY THROUGH  AUTOMATION

Allows single operator can manage up to 5 machines, maximizing efficiency and reducing operating costs.

1 Operator.  Multiple Dozers.

Operates more hours through elimination of idle time and ability to work in dangerous conditions.

90%+ Utilization

Delivers more consistent dozing, improves equipment utilization and increases shift-long operator efficiency.

20-30% More  Material Moved per  Shift

Cat Command for Dozing

Remote Console Demonstration

Remote Operator Station Demonstration

Testimonial: Operating Multiple Machines

Testimonial: Operator Comfort

Testimonial: Productivity and Consistency

Command for Dozing.

<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Decreases potential for injury from slips, trips and falls when climbing on and off machine</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Removes operator from exposure to dust and other hazards.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Minimizes the risk of drilling into bootlegs that may contain undetonated explosive material.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Use of digital drill plans reduces the number of survey and operating personnel needed on the bench.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Collision Avoidance System to prevent unwanted interactions on the bench when operating autonomously</li>
</ul>


<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Automates the entire drill cycle including tramming for a single row of holes.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Requires operator to stay in the cab of the machine to monitor the area around the drill, ensuring it is safe to autonomously move between holes.&nbsp;</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">First step into autonomous drilling enabling the consistent productive performance of autonomous drilling with a lower buy-in cost.</li>
</ul>


Operator Machine Assist

<div>
<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Removes operators from hazardous conditions, functioning from a location on or off property</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Same control layout as MD6250/MD6310 resulting in reduced training time</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Situational awareness with live camera feeds and audio feedback</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Manage one drill remotely or multiple autonomous drills&nbsp;</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Designed to handle operator interventions quickly and smoothly.</li>
</ul>
</div>


<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Automates the entire drilling cycle for one row, including autonomous tramming.&nbsp;</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Removes operators from the cab of the drill</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Flexible and simple, making drilling automation easy to implement and more accessible for all kinds of operation.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Enables one operator to manage drill operations across the mine site, working from a remote operator station located on-site or at an off-site command center.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Good solution for miners who want to turn available time into utilized time.</li>
</ul>


Semi-Autonomous Single Row Drilling

<div>
<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Builds upon the feature sets of OMA and S-ADS to provide autonomous row changes.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Increases operator skill levels</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Enables higher utilization</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Optimized autonomous operation to upscale drill to operator ratio</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">All path planning is done by the system with minimal operator input required</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Good solution for miners with high technology maturity</li>
</ul>
</div>


Autonomous Pattern Drilling

<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Follows a building-block approach —which allows sites to adopt automated drilling at different levels.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">No investment is lost as each technology layer builds on the previous building block leveraging previously installed hardware and software</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Offers a range of capabilities — from automating the drill cycle with an operator onboard to allowing one operator to manage multiple autonomous drills from a remote operator station.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Allows you to configure and automate the drilling system to meet needs today, with the ability to easily grow into tomorrow.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Scalable architecture that allows sites to readily integrate new emerging technologies in the future</li>
</ul>


<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Command operates more hours in a shift than a staffed drill through elimination of idle time such as shift change, meal/bathroom breaks, etc.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Enables continued use of machine without putting operators at risk.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Supports consistent productivity through the shift.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Makes it possible for one operator to control multiple drills.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Delivers higher, more consistent drilling rates for all operators, result in an increase in overall fleet productivity.</li>
</ul>


<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Delivers consistent and accurate drilling that pays off in better blasting, more productive loading and hauling, and more efficient final processing.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Ensures every hole is accurately placed to plan, drilled to the proper depth and angle, and able to stand up until blasting&nbsp;</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Enhances fragmentation consistency by precisely executing drill patterns.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Ensures accurate hole placement— to the right location and toe elevation.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Through improved consistency, reduces the costs associated with fuel, drill tools and explosives.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Preserves machine life and reduces G.E.T. tool waste by limiting operation to be within the OEM parameters for both the machine and the drill tools.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Enables consistent drilling from operator to operator on any terrain.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Reduces machine wear and tear by enabling consistent drill operation under OEM recommendations.</li>
</ul>


Accuracy & Consistency

<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Integrates with Cat machine electronic control systems, saving installation time and speeding machine response time compared to aftermarket systems.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Is designed as part of Cat MineStar, a system that is used and supported around the world on thousands of machines.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Provides access to all operational features, and notifications of critical machine health parameters.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Operator Machine Assist fully integrated into the base machine displays of Cat MD6250 and MD6310 drills.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Semi-Autonomous user interface built on the same user interface platform as Cat drills, enabling a common user interface between Command and staffed drill products.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Remote Operator Station with the same chair, joysticks and keypads as the Cat drill line; also displays the base machine screens to the operator from the remote operator station.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Tightly integrated to the existing Terrain HP-GPS system and leverages a bolt-on overlay approach to interface, minimizing interoperability issues and reducing installation time.</li>
</ul>


<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Delivers consistent and more efficient operations to reduce fuel usage, which translates to a reduction in emissions.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Enables higher machine utilization, for reductions in idle time and less wasted fuel.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Incorporates machine health technologies and data analytics to maximize asset health and performance, reducing waste.</li>
</ul>


<div>Cat® MineStar™ Command for drilling delivers cost-effective, high precision drilling through automation — which will ultimately reduce operating costs, increase safety and improve productivity. Command for drilling ensures that every hole is accurately placed, drilled to the proper elevation and angle, and able to stand up until blasting. A range of capabilities lets site managers configure and automate the drilling system to their budgets and needs. From predrill planning to blasting, Command impacts the bottom line all the way through the crusher and mill.</div>

AUTOMATE DRILLING WITH THE MINING AUTOMATION LEADER

Cat® MineStar™ Command for drilling delivers cost-effective, high precision drilling through automation — which will ultimately reduce operating costs, increase safety and improve productivity. Command for drilling ensures that every hole is accurately placed, drilled to the proper elevation and angle, and able to stand up until blasting. A range of capabilities lets site managers configure and automate the drilling system to their budgets and needs. From predrill planning to blasting, Command impacts the bottom line all the way through the crusher and mill.

Reducing in cycle delays turn non-drilling time into drilling time resulting in overall fleet productivity

10% Reduction in Cycle Times

Higher, more consistent hole positioning and drilling rates result in quality holes and less redrills.

35% Increase in Hole Consistency

Significant improvement in positional and depth accuracy vs. staffed Terrain operation.

20% Accuracy Improvement

Enables operators to manage more than one machine and facilitates short breaks and quick shift changes.

12.5% Improvement in Utilization

Command for Drilling Commercial

Drilling Variability

Cat Command for Drilling

Cat Command for Excavating Brochure (N Am, S Am, Japan)

Cat Command for Excavating Brochure (Europe, Aus-NZ)

<ul><li>When used in a potentially hazardous application, remote control allows the operator to dig, lift, and track from a safe working distance.</li><li>Lower potential injuries from slips, trips and falls when climbing on and off machines.</li><li>Remove operator risk from machine rollover or sliding.</li><li>For added security, only one operator interface can control the excavator at a time.</li></ul>

<ul><li>Restart production immediately following disruptive processes, such as blasting in quarry applications.</li><li>Operators can quickly and easily switch between Cat Command installed machines, and change jobsite locations, with no downtime.</li><li>Improve productivity and reduce operator fatigue by eliminating the effects of vibration and sound.</li><li>Control the machine with the same response time as sitting in the cab.</li><li>Allow operators who have had medical concerns to return to work and operate machines earlier.</li></ul>

<ul><li>Available for select Cat dozers, excavators, and wheel loaders.</li><li>Operators work safely and comfortably off the machine while remaining on-site and having direct visual contact.</li><li>Provides line-of-sight operation from up to 400 meters (437 yds.) away.</li><li>Controls are fully integrated with machine electronics to provide the same control and response as if operating from the cab.</li><li>Does not require any on-site communications infrastructure.</li><li>Uses either a 900 MHz or 2.4 GHz frequency communications protocol.</li><li>View comprehensive machine information including engine rpm, fuel level, hydraulic temperature, engine temperature, aftertreatment status, operation modes, pressures, and machine warnings through the LCD display.</li><li>The machine will shut down if the controller is tipped more than 45 degrees, indicating that the operator has fallen.</li></ul><br /><em>NOTE: Command Console is unavailable in Europe, Australia, or New Zealand.</em>

Cat Command Console

<ul><li>Available for select Cat dozers, excavators and wheel loaders.</li><li>Enables the operator to work remotely in a comfortable, seated “virtual cab” with familiar controls and machine displays.</li><li>Can be located in a command center onsite or many miles away.</li><li>Reduces operator fatigue with a comfortable indoor working environment.</li><li>Operator inputs are sent directly to the machine electronics via a dedicated radio transmitter/receiver, resulting in real-time implement control.</li><li>Controls deliver the same response time as in the cab, maintaining precise control for all excavator applications.</li><li>High-quality video delivers a clear view of the work area.</li><li>Operators can easily switch between machines, or change jobsites with no downtime.</li><li>Enables trainers to stand beside an operator, without noise or movement.</li></ul>

Cat Command Station

Get Started With Cat Command

Cat Command for Excavating is a remote control option that contributes to jobsite safety by allowing operators to run an excavator remotely in hazardous applications.

Enhance Operator Safety

Cat Command For Excavators

Cat Command Console for Excavators

Cat Command for Excavation - Saiia

Cat Command for Loading & Excavation - Associated Terminals

Cat Command Console for Excavators - 360°

Cat Command for Excavators

Command for Hauling at a Glance

Flexibility

People and Processes

Cat® MineStar™ Command for hauling takes advantage of the most sophisticated technologies available to deliver a next-generation haulage solution — one that boosts safety, productivity and availability on busy mine sites, especially those in difficult or remote locations. Command provides the fully integrated operation of autonomous mining systems, allowing them to haul more efficiently with near-continuous operation and move more with fewer people on site. Autonomous trucks operate safely around other equipment, light vehicles and personnel. Command trucks respond to calls to the shovel, move into position, haul to dump points and even report for maintenance — all without an operator on board.

TAKE COMMAND OF YOUR HAULING OPERATION

6.84 in × 3.55 in × 1.94 in (173.7 mm × 90.2 mm × 49.2 mm)

Four video inputs, support NTSC video inputs

64 Class 1 – eye safe 905 N∙m wavelength

Four illuminated push buttons with tactile feedback one 4-way rocker switch

Integral audible alarm located on the front face. Two outputs for external alarm.

Improves efficiency, enables consistency and provides near-continuous operation

30% Boost in  Productivity

Consistent operation reduces fuel burn and helps deliver maximum machine life

20% Cost Reduction

Command for Hauling

Reversing at Dump

Avoiding Collisions

Autonomous Zones

Capacity & Scalability

Avoiding Obstacles

Maintenance

Mixed Fleets

Cat Command for Loading Brochure

<ul><li>Reduces operator safety risks such as high wall collapse, machine rollover or fall.</li><li>Decreases potential for injury from slips, trips and falls when climbing on and off machine.</li><li>Includes multiple, redundant safety features to stop all motion of machine if a stop switch is pressed, wireless communications are lost, a severe fault is detected or the command console is tilted more than 60 degrees from normal operating position.</li><li>Prevents accidental activation with command console that is unique to each machine system.</li><li>Prevents coasting in neutral thanks to auto hold feature.</li></ul>

<ul><li>Operators can quickly and easily switch between Cat Command installed machines, and change jobsite locations, with no downtime.</li><li>Reduce operator fatigue by eliminating the in-cab effects of vibration, noise, and rough terrain.</li><li>Quick system response and fine modulation of controls are enabled through comprehensive machine integration of the electronic and hydraulic systems.</li><li>Commands from the command console are sent directly to the engine and implement electronics via a dedicated radio, reducing delays.</li><li>The system allows complete control with access to advanced features offered on Cat machines such as Autodig, an optional feature that increases productivity.</li><li>Allow operators who have had medical concerns to return to work and operate machines earlier.</li></ul>

<ul><li>Available for select Cat dozers, excavators, and wheel loaders.</li><li>Fully functional command console contains basic machine functions such as start-up/shutdown, gear selection, rack/dump and lift/lower are easily accessed through the ergonomic layout of console controls.</li><li>Critical machine and system status information is also delivered through the command console.</li><li>LED indicator lights and display show the user the gear selection, temperatures, operational mode, faults, systems status, and low battery warning.</li><li>Integration of Caterpillar electronics enables the activation of several safety features to ensure the user is in control of the machine at all times.</li><li>Command console allows for line-of-sight control up to 400 meters (437 yards).</li><li>Does not require any on-site communications infrastructure.</li><li>Uses 2.4 GHz frequency communications protocol.</li><li>The machine will shut down if the controller is tipped more than 45 degrees, indicating that the operator has fallen.</li></ul><br /><em>NOTE: Command Console is unavailable in Europe, Australia, or New Zealand.</em>

Cat Command for Loading is a remote control option that contributes to jobsite safety by allowing operators to run a wheel loader remotely in hazardous applications.

Enabling Safety and Productivity in Hazardous Conditions

Cat® Command for Loading – Small Wheel Loaders

Cat® Command – Safety

Cat® Command for Loading – Efficiency

Take COMMAND | Remote Control Loading for the Cat® 988K Wheel Loader

Cat® Command for Loading | Command Station

Command for Loading

<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Provides ability to relocate operators to a safe, comfortable location underground or on the surface, increasing safety and reducing fatigue.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Eliminates exposure to noise, dust, seismic activity and other underground hazards, and reduces the need for air delivery and cooling.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Decreases potential for injury from slips, trips and falls when climbing on and off machine.</li>
</ul>


<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Combines machine guidance capabilities with mine infrastructure to enable automated tramming through narrow mine drives and provides three levels of operation.&nbsp;</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Teleremote, used for bucket loading and unloading, which enables the machine to be run from a distant location with the operator providing all machine input.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Copilot semi-autonomous operation, which enables the operator to monitor the machine’s location on a mine plan and use the joysticks to give the machine directional input if necessary; leverages on-board scanners, combined with radio network infrastructure, to ensure the machine self-steers along a safe path.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Autopilot autonomous machine operation (tramming and dump cycle), which allows the machine to auto tram, dump and return for operator control of the loading process; allows full operator control of the system to be obtained through teleremote mode.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Provides control of all operational functions utilized in the cab through seat-mounted joysticks in the remote operator station.&nbsp;</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Real-time view of machine location and status through onboard cameras, along with guidance systems.</li>
</ul>


Capabilities

<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Ranges from simple line-of-sight to full autonomy, offering scalability that allows mines to build to their desired level of technology.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Allows you to configure and automate the drilling system to meet needs today, with the ability to easily grow into tomorrow.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Scalable architecture that allows sites to readily integrate new emerging technologies in the future.</li>
</ul>


<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Increases machine utilization by reducing the downtime required for shift changes, blast times, and other conditions that can remove operators from the face; enables continued use of machine without putting operators at risk.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Makes it possible to access deeper ore bodies that were previously not extractable.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Boosts productivity by allowing one operator to control multiple machines.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Reduces operator fatigue and drives consistent productivity through the shift.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Enables second-gear tramming for increased efficiency.</li>
</ul>


Productivity & Efficiency

<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Improves accuracy of tunnel navigation, boosting productivity and reducing machine damage caused by contact with drive walls.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Enables reduced fleet size by making it possible for a single machine to pull from the draw point and tram in second gear to the ore pass, eliminating rehandling and the need for another machine.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Improves operator comfort, retention and recruitment and helps address the skills crisis.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Reduces but does not eliminate workforce.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Improves machine longevity, with machine consistently operating to optimum parameters.</li>
</ul>


Reduced Costs

<ul>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Integrates with Cat machine electronic control systems, saving installation time and speeding machine response time compared to aftermarket systems.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Is designed as part of Cat MineStar, a system that is used and supported around the world on thousands of machines.</li>
&nbsp;&nbsp;&nbsp;&nbsp;<li role="presentation">Provides access to all operational features, and notifications of critical machine health parameters.</li>
</ul>


Cat® MineStar™ Command for underground enables remote operation of load-haul-dump machines to deliver immediate productivity and efficiency gains to your operation. The system improves safety by removing operators from hazardous environments. It also delivers machine utilization increases over line-of-sight mucking operations by reducing the downtime required for shift changes, blast times, and any other conditions that can remove operators from the face.<br />Options range from simple line-of-sight to full autonomy. This building block approach allows miners to capture value at their most economic entry point while allowing scalability as technology maturity grows.

BOOST SAFETY AND INCREASE MACHINE UTILIZATION

Through shift-change time reductions, elimination of downtime due to drivewall collisions, and more.

40% Increase in Utilization

By keeping operators on the surface, which reduces shift change time to near zero.

34% Increase in Total Operating Time

Through combination of higher utilization, increased productivity and reduced personnel costs.

Products

Parts & Support

Technology

Company

Careers

Command

Cat Command for Dozing in Construction

Cat Command for Dozing in Construction

Cat command for Dozing in Mining

Cat Command for Dozing in Mining

Cat Command for Drilling

Cat Command for Drilling

Cat Command for Excavating

Cat Command for Excavating

Cat Command for Hauling

Cat Command for Hauling

Cat Command for Loading

Cat Command for Loading

Cat Command for Underground

Cat Command for Underground

BUY A CAT 1-3T NEXT GEN MINI EXCAVATOR WITH A CAT B HAMMER.

Sign up to our newsletter

Products

Parts & Support

Technology

Company

Careers